DetarvaAcademy
IDEN
K-BGKReading Working Drawings

Reading Working Drawings from Zero

Open a drawing set and know where to start.

Start chapter 1 freeEnrol in this course
6515065200558+12.450A.P. ATAP+13.350PUNCAK PARAPETTOPI PARAPET BETON PRACETAKMIRING 10% KE ARAH ATAPSTEK Ø10-600 KE DINDINGDINDING PARAPET BETON T.150COR MONOLIT DENGAN PELATSEALANT PU DALAM REGLET 20×20MEMBRAN BAKAR 4MM NAIK 200MMDARI PERMUKAAN FINISH ATAPPLESTER PELINDUNG + KAWAT AYAMFILLET SPESI 50×50 +LAPIS PENGUAT MEMBRANSCREED PELINDUNG T.50, NAT @3MMEMBRAN BAKAR 4MMSCREED MIRING MIN. 1% KE DRAINPELAT ATAP BETON T.120ALUR TETESAN 8×8PLESTER + ACI +CAT EKSTERIORBALOK TEPI 250×500BATA RINGAN T.150ILUSTRASI CONTOHBUKAN UNTUK KONSTRUKSI1K-BGKREADING WORKING DRAWINGS FROM ZEROSKALA 1:10
Level
Beginner
Lessons
28
Time
2h 49m
Rating
4.9
Learners
34.2K
Updated
Oct 2026

After this course

What you'll be able to do yourself.

Many juniors freeze in front of a drawing set because nobody showed them the reading order. Here you learn to follow the addresses from plan to section, to detail, to schedule, then on to revisions and as-builts. Every chapter starts from something that really happens in a studio or on site.

  1. 1Find anything in a set through the sheet list, title block and callouts.
  2. 2Read plans, elevations, sections and levels as one building.
  3. 3Translate drawing terms into site language and back.
  4. 4Read a section detail layer by layer, including typical details and frame schedules.
  5. 5Follow revisions through clouds, deltas and the revision table.
  6. 6Explain how working drawings differ from as-builts, and when each one is used.

Good for

  • Architecture and civil engineering students who have never held a project drawing set.
  • Junior drafters in their first weeks and months.
  • New site engineers and supervisors who have to read drawings on site.

Full syllabus

Chapter by chapter, nothing hidden.

28 lessons, 2h 49m in total. Chapter 1 is open to everyone.

Chapter 1One drawing set, one bookFreeHow to open a set, read the title block and follow addresses between sheets.7 lessons / 41 min
  1. A working drawing is an instruction5 min
  2. Site language vs drawing language4 min
  3. The title block: read this first5 min
  4. The code bubble is an address5 min
  5. First week: how wide is the groove?6 min
  6. Read one window sill detail6 min
  7. Chapter 1 test10 min
Chapter 2Plans, sections and levelsA building cut across and through, with heights read from the datum.7 lessons / 42 min
  1. A plan is a building cut open5 min
  2. Sections, elevations and the datum5 min
  3. Work out levels7 min
  4. Rebuild the parapet layers6 min
  5. Change the stair parameters5 min
  6. Section and level terms4 min
  7. Chapter 2 test10 min
Chapter 3Details, typicals and schedulesHow one detail gets used many times, and how to read it layer by layer.7 lessons / 42 min
  1. One drawing for forty windows5 min
  2. Reading a detail layer by layer5 min
  3. Rebuild the window sill layers6 min
  4. Frame and schedule terms4 min
  5. Find the faults in a window sill6 min
  6. The J1 that was really a J26 min
  7. Chapter 3 test10 min
Chapter 4Drawings that change: revisions and as-builtsHow changes are recorded from the studio to the finished building.7 lessons / 44 min
  1. Revision clouds on working drawings5 min
  2. The most honest drawing comes after the building5 min
  3. Revision and issue terms4 min
  4. A waste pipe hits a beam6 min
  5. Find the faults in a parapet6 min
  6. Draw a parapet detail8 min
  7. Chapter 4 test10 min

Lesson kinds

  • Concept
  • Glossary
  • Site case
  • Read a model
  • Chapter test
  • Calculate
  • Layer Stack
  • Slide the Parameter
  • Spot the Fault
  • Draw the detail

Get a feel for it

You practise, you don't just watch.

Try it: Slide the ParameterIllustration, not for construction
6515065200558+12.450A.P. ATAP+13.350PUNCAK PARAPETTOPI PARAPET BETON PRACETAKMIRING 10% KE ARAH ATAPSTEK Ø10-600 KE DINDINGDINDING PARAPET BETON T.150COR MONOLIT DENGAN PELATSEALANT PU DALAM REGLET 20×20MEMBRAN BAKAR 4MM NAIK 200MMDARI PERMUKAAN FINISH ATAPPLESTER PELINDUNG + KAWAT AYAMFILLET SPESI 50×50 +LAPIS PENGUAT MEMBRANSCREED PELINDUNG T.50, NAT @3MMEMBRAN BAKAR 4MMSCREED MIRING MIN. 1% KE DRAINPELAT ATAP BETON T.120ALUR TETESAN 8×8PLESTER + ACI +CAT EKSTERIORBALOK TEPI 250×500BATA RINGAN T.150

Slide the value. The drawing follows, just like in the lessons.

The membrane ends above ponding level. A common rule of thumb: at least 150 to 200 mm above the roof finish.

Illustration, not for construction

Your creator

Taught by someone who still does the work.

Your creator

Yudha Pranaja

Senior drafter

A practitioner who teaches from their everyday work.

Courses
4
Learners
74.6K

Other courses

About becoming a creator

Learner reviews

From people who took it.

4.9out of 5

3.2K reviews

  • 590%
  • 47%
  • 32%
  • 21%
  • 10%

  • Mega Puspitasari

    Junior architect

    I used the revision check section at the office that same week.

  • Bagas Wicaksono

    Junior quantity surveyor

    In my first week at work I was too embarrassed to ask about symbols. This course closed that gap in two weekends.

  • Salsa Rahmadani

    Junior drafter

    Reading a full drawing set changed how I check sheets. Now I start from the drawing list, not the plan.

Questions that come up

About this course.

All questions

01

What can I try for free?

All of chapter 1, "One drawing set, one book": 7 lessons, about 41 min. No card needed. If it isn't for you, stop there.

02

What should I know before starting?

Nothing in particular. The course starts from what you see on a drawing and on site, and builds from there.

03

Subscribe or buy this course?

Pro is Rp149.000 a month and opens every course, track, exam and certificate. Buying this course is Rp299.000 once and it stays yours. If you plan to take more than two courses, Pro usually comes out cheaper.

04

Do I get a certificate?

Certificates come from track exams, not single courses. This course counts toward Reading Working Drawings, Studio-Ready Drafter, Site Supervisor, Cost Estimator. The exam runs 60 minutes and you pass at 75 percent.

05

Can I use these drawings on a project?

No. Every drawing in the course is an illustration for learning, not for construction. Use them to understand the logic, then follow your firm's standard and your engineer's drawings.

Part of

This course counts toward these tracks.

Where next

Courses people often take next.

All courses
  • sms

    Reading Working Drawings / Beginner

    Symbols, Scale and Dimensions

    The grammar of a working drawing: lines, hatches, scale and numbers.

    Yudha Pranaja
    Lessons
    18
    Time
    1h 56m
    Rating
    4.8
    Learners
    14.8K
  • chk

    Reading Working Drawings / Intermediate

    Checking Drawings Before Issue

    Find your mistakes before the crew does.

    Yudha Pranaja
    Lessons
    18
    Time
    1h 51m
    Rating
    4.9
    Learners
    11.2K
K-BGKStart with chapter 1

Reading Working Drawings from Zero free.

No card needed. If it suits you, go on with Pro or buy this course.

Start chapter 1 freeSee plans, Rp149.000